Nylon 66 Rod & Sheet
Nylon 66 is a versatile engineering plastic. It is hard and tough, with a high melting point and good wear resistance. It is light, has good chemical resistance and is a good electrical insulator. Nylon 66 will give long service as a wear part with little or no lubrication. It can easily be bonded, welded and machined. Applications include; cams, gears, bearings, bushes, wheels, rollers, pulleys and electrical insulators.Technical Specification
Toggle viewColour | White/Cream |
Specific Gravity | 1.14 g/cm³ |
Moisture Absorption in Air | 2.8% |
Water Absorption | 8% at Saturation |
Tensile Strength at Yield | 88 N/mm² |
Elongation at Break | 150% |
Modulus of Elasticity | 3100 N/mm² |
Hardness (Rockwell - R) | 115 |
Melting Point | 255°C |
Thermal Conductivity | 0.23 W/k-m |
Maximum Operating Temp. | 115°C (Long Term)/ 160°C (Short Term) |
Minimum Operating Temp. | -30°C |
Co-efficient of Linear Thermal Expansion | 7 x 10^-5 K^-1 |
Flammability (UL-94) | V2 |
Volume Resistivity | 10^12/10^15 Ohm-cm |
Dielectric Strength | 36/100 Kv/mm |