AlteSil Primeâ„¢ - Platinum Silicone Tubing

Where absolute integrity is paramount, AlteSil Primeâ„¢ will exceed expectations. Standard peroxide-cured silicone will leech chemicals as bi-products of the curing process. AlteSil Primeâ„¢ is Platinum-Cured, with the only bi-product being water. Material complies with FDA specification 177.2600 and European Pharmacopoeia. Suitable for peristaltic pump use. Produced in class 10000 clean-room conditions.
  • AlteSil Primeâ„¢ - Platinum Silicone Tubing

Material Specification

Tensile Strength 8 MPa Tear Strength 30 KN/m
Hardness 65º Shore 'A' Density 1.18 g/cm³
Elongation at Break 500% Maximum Temperature 200ºC
Minimum Temperature -40ºC Material Grade Platinum Cured Silicone
Colour Translucent

Product Range

Bore  Wall  Coil Length  Product Code Price (+VAT)
per Coil
1.50mm 1.00mm 100m 03-93-3411 £144.59 In Stock
2.00mm 1.00mm 100m 03-93-3414 £189.00 In Stock
3.00mm 1.00mm 100m 03-93-3417 £226.80 In Stock
3.20mm 0.80mm 100m 03-93-3419 £177.66 In Stock
5.00mm 1.60mm 60m 03-93-3428 £216.41 In Stock
6.00mm 2.00mm 30m 03-93-3431 £148.37 In Stock
9.50mm 3.20mm 15m 03-93-3445 £148.37 In Stock
Supplied in whole coils only, non-sterilised. NOTE: As with all Altec products, AlteSil Prime is not suitable for use in patient-connected applications.